User's Manual

5Mbps Draft
R03.h RT 1000 1.5.0 Deployment Guide 47
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
3. Backhaul
Configure the Radios
4 Verify that the radio powers up. The LED indicators have the following
meanings:
5 Click the Windows Start icon.
6 Select Control Panel. The Control Panel window opens.
7 Select Network and Internet.
Figure 3–16 Fluidmesh Radio Private Network
Table 3–5 Fluidmesh Radio LEDs
LED State Description
Power On / Green On whenever the radio has
power
LAN On / Green On whenever the radio has an
Ethernet connection
Signal Strength (1) On / Red
BootingCoresystem
Signal Strength (2) On / Orange
Bootingwirelesssystem
Signal Strength (3) On / Green
Bootingroutingengine
Signal Strength (4) On / Green
Bootingunitconfiguration