User's Manual

5Mbps Draft

R03.h RT 1000 1.5.0 Deployment Guide 91

A. Legal Information

Industry Canada Compliance

The Base Station Unit has been granted FCC equipment authorization under the

FCC Identifier YZO-00400.

The Wireless Remote Unit has been granted FCC equipment authorization under

the FCC Identifier YZO-00100.

A.2 Industry Canada Compliance

The Base Station Unit has been granted Industry Canada (IC) approval and

certification per RSS-210 Issue 8 and RSS-102 Issue 4 as:

 1Mbps BSU: Model number 10-0009, IC: 10081A-WSI00401

The Wireless Remote Unit has been granted Industry Canada (IC) approval and

certification per RSS-210 Issue8 and RSS-102 Issue 4 as:

 1Mbps WRU: Model number 10-0001, IC: 10081A-WSI00101

 5Mbps WRU: Model number 10-0017, IC: 10081A-WSI00102

WSI 65-0023 2400-2485 5 dBi 25º 0.5 lbs

0.2 kg

12 x 0.6 in

355 x 15 mm

WSI 65-0025 2400-2485 2 dBi @ 2.4 120° 1.6 oz

45.4 g

7.6 x 0.5 in

193 x 12.7 mm

Table A–1 Antenna Specifications (cont.)

Model

Frequency

(MHz)

Gain

Vertical

Bandwidth

Weight

Dimension

(Length x

Diameter)

WARNING

In order to comply with FCC radio frequency (RF) exposure

requirements, the RT 1000 units must be installed so that a minimum

separation distance of 20 cm is maintained between the antenna(s) and

all persons at all times during normal operation.

NOTE

You cannot mix 1Mpbs WRUs and 5Mbps WRUs in the same spread. You

must use all of the same type.