User's Manual

5Mbps Draft
70 RT 1000 1.5.0 Deployment Guide R03.h
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
4. Demobilization
Disassemble the WRU
3 Remove the geophone from the unit.
4 Remove the batteries from the unit.
● Press the catch on the battery latch.
● Lift the lever, but do not lift the bail from the molded area on the battery.
● Continue to lift the lever using the bail to push the battery out of the
connector.
5 Secure the equipment in the transport vehicle.
TBD
Figure 4–3 Removing the Antenna
Image showing geophone installation TBD.
Figure 4–4 Removing the Geophone
Figure 4–5 Removing the Battery