User's Manual

5Mbps Draft
R03.h RT 1000 1.5.0 Deployment Guide 69
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
4. Demobilization
Disassemble the WRU
3 Place the unit flat in the transportation vehicle as shown in the following figure.
The unit shuts down. The LEDs on the top of the unit are off.
4 Optional: Remove batteries, antenna, or geophone as described in
“Disassemble the WRU” on page 69.
4.3 Disassemble the WRU
This section describes the process to disassemble the WRU prior to demobilization.
To disassemble the WRU:
1 Undeploy the equipment as described in “Removing the WRU from the Field” on
page 68.
2 Remove the antenna from the unit.
Figure 4–2 Undeployed Unit