User's Manual

5Mbps Draft

RT 1000 1.5.0 68 Deployment Guide R03.h

4. Demobilization

4.1 Overview

This chapter describes how to prepare (undeploy) the ground electronics for

transport at the end of a project (demobilization).

4.2 Removing the WRU from the Field

This section describes the process to ready the WRU for movement to a new

physical location or to remove it in preparation for demobilization.

To undeploy the WRU:

1 Prerequisites:

● The WRU is assembled with battery, geophone, and antenna

● The WRU is in an active, transitional, or ready state

2 Pick up the WRU and point the geophone connector end towards the sky as

shown in the following figure. All of the LEDs illuminate:

Figure 4–1 Power Off the

Unit