User's Manual

5Mbps Draft

64 RT 1000 1.5.0 Deployment Guide R03.h

3. Backhaul

Removing the Backhaul Equipment

To install two radios on the mast:

1 Prerequisites:

● TBD

● The radios are configured to allow the PoE option (see step 11 on page 59).

● The radios are BOTH configured as mesh POINTS (see step 6 on page 57).

2 Attach two radios to the mast. Refer to the deployment instructions for the

location at which to aim the radio. One should point towards the recording

truck (uplink), and the other should point towards the next remote backhaul

location (downlink).

3 Connect the two radios with a short Ethernet cable: Radio1/LAN 2 to Radio 2/

LAN 1.

4 Connect Radio 1/LAN 1 to the PoE.

3.6 Removing the Backhaul Equipment

TBD

3.7 Use Cases or Example Deployments

This section shows a few example deployments.