User's Manual

5Mbps Draft
R03.h RT 1000 1.5.0 Deployment Guide 63
© 2010-2012 Wireless Seismic, Inc. All rights reserved.
3. Backhaul
Installing Two Radios on the Mast
19 Uncoil an Ethernet cable. Attach one end to the BSU and the other end to the
PoE.
20 Check Ethernet status lights, if not green or flashing green remove Ethernet
cable from the PoE, count to five and re-insert.
21 If status does not change to green or flashing green report the condition.
3.5 Installing Two Radios on the Mast
When you are installing a remote backhaul, there can be two radios on the mast
as shown in the following figure:
Figure 3–32 Two-Radio Installation