User's Manual

Preliminary
RT 1000 v1.0 26 Deployment Guide R01
© 2010-2011 Wireless Seismic, Inc. All rights reserved.
7
Demobilization
7.1 Overview
This chapter describes how to prepare (undeploy) the ground electronics for
transport at the end of a project (demobilization).
7.2 Undeploy the Ground Equipment
This section describes the process to ready the ground equipment for
movement to a new physical location or to remove it in preparation for
demobilization.
To undeploy the ground equipment:
1 Prerequisites:
● The WRU or LTU is assembled with battery, geophone, and antenna
● The WRU or LTU is in an active, transitional, or ready state
2 Pick up the unit and point the geophone connector end towards the sky as
shown in the following figure. All of the LEDs illuminate: