User's Manual

Preliminary
18 RT 1000 v1.0 Deployment Guide R01
© 2010-2011 Wireless Seismic, Inc. All rights reserved.
Layout
At the Site
4 The unit will begin a series of internal and external tests. The LEDs on the top
of the unit indicate the current test and whether the unit passes or fails each
test. The following table describes when user action is required.
Figure 2–8 Place the Unit
Table 2–1 LED Indicators
LED State Description
Flashing A test is in progress. No user action required.
Solid green The test is complete. No user action for green LED.