User manual
Company Condential Proprietary
XMC-ORI Interface cable - Harris orion Draft
V0
X10DR
¥
150cm
"J1"
FEMALE, 15-CONTACT
D-SUB CONNECTOR
WG*15C +ADB
unstripped
unstripped
50cm
In-line fuseholder
1A FB fuse
Drain
Red
1
3
4
5
6
7
8
9
13
Drain connects to shell
Switched B+ from radio
Ext Mic Hi
Mic Lo to radio
Received audio from radio
Ext PTT to radio
Emergency out to radio
COR/ Audio unmute from radio
DC/ Digital Ground
Remote/ footswitch/Handle bar PTT
DB15 F
S
1A FB fuse
Battery
WH
Remote Mount
The Basic Accessory Cable, at one end, consists of the basic accessories
connector (P3) and the speaker connector (P2). At the other end is the
plug P1. P1 will connect to the Option Connector (OPT) which is
mounted on the back of the Radio Interface Adapter (RIA). The
Extended Option Accessory Cable is the same as the Basic Cable but
with the addition of the Extended Option Plug (P4). See Figures 18 and
19.
Figure 18 - Remote Mount Standard Accessory Cable 19B802554P6
18
Figure 19 - Remote Mount Extended Option Accessory Cable
19B802554P7
19
P1 or equivalent or other connectors
i.e. whatever is accessible/practical.
25
24
12
13
21 ( program for Ext PTT?)
23 ( program for Emergency Input?)
22 ( program for COR/radio unmute?)
1
WE HAVE NOT TESTED ON HARRIS ORION MOBILE AS
YET BUT BASED ON SUPPLIED DOCUMENTION SHOULD
BE ABLE TO WORK ASSUMING PINS 21,22 1NBD 23 ARE
PROGRAMMABLE AS SHOWN.
ORION MOBILE WIRING HARNESS
BLK/WH
RED 22AWG with fuseholder
* or Purple
** or Purple /White
BLK
BRN
RED
ORG
YEL
GRN
BLU
PUR
GRY
BLK/WH