User Guide

Gateway Programming:
Audio Levels
Receiver Input Gain From Radio
Sets the receive input sensitivity. Default - 0
Transmit Output Gain To Radio
Sets the audio output level to radio when local/remote /handlebar PTT is pressed
or when “Live Mic” is active. Default - 0
Talk Around Output Gain to other X10DRs
Sets the “intercom” microphone audio level. Default - 0
Find Me™ Function
Enables Find Me function in gateway. User double presses gateway Function
button to trigger Find Me alert tones or triggers Remote FindMe.
Default - OFF
Radio Receive VOX/COR
Enables VOX derived COR.
Default - ON
VOX Trigger Level
Sets the gateway’s audio detect sensitivity for VOX derived COR. Default - 70
Public Address Mode
Sets the gateway so only handset Talkaround audio is sentto the gateway 3.5mm
jack. When unchecked both Radio PTT and Talkaround audio is available for in-car
monitor use. Default - OFF
Monitor Emergency Input Alert Tone
Causes Emergency warble alert tone to sound in all cross connected X10DR
handsets whenever emergency input is triggered. (i.e. triggered from another
gateway or externally supplied ground input).
Default - OFF
Trunking Support
Enables speaker audio upon PTT for 500mS, so host trunked mobile’s Channel
Grant /Talk Permit tones can be clearly distinguised by user. Handset Mic audio is
also muted for 500mS to prevent those tones being rebroadcast over talkgroup. For
optimum performance set VOX trigger level for 90-100 for fastest response.
Default - OFF
Elite Plus Series Only Options
Multi Operational Mics
Allows two or three Elite Series Mics to be simultaneously operational through
the one Elite gateway unit.
Default - ON
Remote Find Me™
Enables Find Me function in gateway via grounding the white wire connected to
pin 8 (Replaces Remote PTT function)
Default - OFF