Out of Vehicle Communications Solution Rev 1.4 Programming Parameter Guide For Elite Plus and Pro Plus Models Some features are only applicable to firmware version 4.
How to install Programmer: Runs On PC or Mac running Windows 7/10 NOTE: Requires USB 2 Port. The programmer will not work with USB 3 - if your PC only has USB3 ports suggest you attach X10DR device via a usb patch block most are USB 2.) Included with the Programmer download file application are instructions on how to set-up the programmer on your Windows 7/10 PC. Please follow those instructions to install the programmer correctly onto your computer. www.x10dr.
How to use Programmer: Note: The Programmer automatically identifies the device type Runs On PC running Windows 7/10 Requires USB 2 Port. To put Handset into programming mode: Turn off handset, attach programming cable between device hirose port and PC then press red handset on/off button while holding PTT. The handset’s LED will light red. To put Gateway into programming mode: Turn off gateway.
Handset Parameters Stealth mode always active Disables all alert tones and LED status light. User can manually enable stealth mode if programmed off. Default - OFF Mute speaker on PTT Disables all speaker audio whenever PTT is pressed. Default - OFF Mute speaker on charge Disables speaker when handset is in gateway or a charger. Default - ON LED charge indicate Disables “momentary blink” charge indicate when handset is placed into gateway or a charger and device is charging.
Handset Programming: Basic functions Internal Mic Only Operation Maintains operation via internal microphone when accessory attached to Hirose port.required for earpiece (WPEH-X10/WPTEP-X10) use via Hirose headset port. Default - OFF Out of range turn off time Sets time in hours that a handset that is not actively connected to a gateway will remain powered on before turning itself off.
Handset Programming: Audio Levels We recommend you use the XGALA Gateway Audio Level Adjustment software tool for setting levels between host radio and X10DR gateway. It can be downloaded at www.x10dr.com for setting audio in and out between the gateway and the host mobile radio. The following handset adjustments are designed to cater for different audio accessories and/or user applications requiring alternate audio sensitivities to suit different operating conditions.
Handset Programming: Emergency When handset is configured for press & hold emergency Audio link active time Sets the duration the transmit audio is active after Emergency button is released. Feature is intended for those mobiles that activate their own internal “Live Mic” function whenever emergency is triggered. This allows the handset’s Tx audio to be broadcast over the radio’s transmit channel, (assuming mobile sources “Live Mic” from its external mic input).
5 Handset Programming: Hardware Hirose Pin 2 function Sets Hirose pin 2 to be either BAT+ (~3.3VDC) to power external accessories or bridged output speaker audio when pin 2 is set for speaker negative. Default - Speaker -VE Acc PTT Sets whether Hirose PTT input generates Talkaround or Radio PTT. Default - Radio PTT PTT Sets function of main large PTT button. Choose from drop down box. Default - Radio PTT Top 1 Sets function of top left button. Choose from drop down box.
Handset Programming: Dropdown box button assignment selection Elite Plus Handset Right 1 Button - Short Press Assignments: Search - Resets connection to its paired gateway, other paired gateways or Relay Mode paired handsets LTE RSM On/Off - Toggles transmit function between configured X10DR functionality to a dedicated LTE (PoC) configured smartphone attached via curly cord - LED glows white when On.
Gateway Parameters Pro Plus Elite Plus Elite Plus X10W XRTG Elite Plus Special order only Status light Function Button - Manual Off/On - Touchless Pairing - Master Reset - Find Me XIVG Gateway Elite Plus and Pro Plus models available *We highly recommend use of the XGALA Gateway Audio Level Adjustment tool for setting audio levels. Download here: https://www.x10dr.com/wp-content/uploads/2020/11/XGALA-Gateway-Audio-Level-.
Gateway Programming: Audio Levels Receiver Input Gain From Radio Sets the receive input sensitivity. Default - 0 Transmit Output Gain To Radio Sets the audio output level to radio when local/remote /handlebar PTT is pressed or when “Live Mic” is active. Default - 0 Talk Around Output Gain to other X10DRs Sets the “intercom” microphone audio level. Default - 0 Find Me™ Function Enables Find Me function in gateway.
Gateway Programming: Hardware I/O Defines whether the specific gateway interface pin is assigned as an input or an output. Active Sets whether the interface pin needs to be held low or pulled up high to activate assigned functionality. Function Assigns desired functionality to Interface pin. Choose the desired input or output from the dropdown boxes.
Pro Plus Default settings: Handset - Gateway 5000 All rights reserved Wireless Corporation Limited ©2022 Wireless Pacific™, X10DR®, Liberate your mobile™, Find Me™, Powerfully Simple™ and their logos are trademarks or registered trademarks of Wireless Corporation Limited : Manual revision 1.
