User's Manual

Wireless Matrix SDT-5000 Installation and User Guide
Doc. 020-331-0002v1.1 8/31
Pre-Installation Considerations
You should perform a pre-installation evaluation before installing any SDT-5000 components. A
pre-installation evaluation will provide information about how and where to install the SDT-5000
and will help identify potential installation issues. During the pre-installation evaluation, you should
estimate available space for component placement, cable routing and inspect the location to
determine the most suitable area for an antenna installation. After completing a pre-installation
evaluation, you should know where to locate components, how to route cabling and what additional
mounting accessories, wiring and cabling conduits will be required for the installation.
General Considerations
 Check for obstructions at the site below ground level when digging holes for the units
mounted on poles.
 Stay at least 20 cm away from an operating antenna when you are above the level of the
antenna base.
 Do not remove the antenna cover: removing the antenna cover will void the product
warranty.
 Do not paint the antenna: paint on the antenna will void the product warranty. Paint may
also interfere with signal transmission or reception.