User's Manual

Wireless Matrix SDT-5000 Installation and User Guide
Doc. 020-331-0002v1.1 31/31
SDT-5000 Component List
SDT-5000 Component Name
SDT-5000 Modem with Antenna
Attached mounting bracket
Junction Box
This Manual
Recommended Components (Not Supplied)
Laptop with suitable VT100 compatible communications software such as
Windows Hyper-terminal Application
Mounting Pole either 2 3/8” or 2 7/8” diameter
U-bolts (depending on mounting pole width)
12-Volt Power Supply - A typical remote site will require a battery with
recharging solar cell.
Multi-meter
Compass
7/16-inch and 9/16-inch (or adjustable) Wrench
Equipment and supplies to attach pole to existing structure or concrete in
hole for free standing mount
Equipment and supplies to attach power leads and RTU inter-cable to
remote measuring device
Equipment and supplies for routing through conduit or Seal-Tite if power
supply or remote measuring device is located in a hazardous area
Serial cables and adapters as required to connect computer to test inter-
cable