User's Manual

Wireless Matrix SDT-5000 Installation and User Guide
Doc. 020-331-0002v1.1 26/31
Figure 8. User Message (Send portion) window
6. Press the Enter key. The cursor moves to the Select field.
7. Type “S” for Send in the Select field. Press the Enter key.
8. As long as the status line at the lower left reads “OPERATIONAL | SYNC” and the SNR
reads above “16”, the message should be returned and displayed in the Receive (upper)
portion of the User Message screen (see figure 9).
NOTE:
If the message is unsuccessful, refer to the “Trouble Shooting” section of this
document.