Installation Instructions

Wireless Matrix MBS2-LP Installation Guide Document MBUD-0088v1
March 04, 2004 Page v
Other Safety Precautions
Read and understand the complete Installation Guide, including the Safety Precautions, prior to using the
MBS2-LP Modem.
The MBS2-LP is a radio unit used to receive and transmit data. When in operation, the MBS2-LP
transmits and receives RF signals to and from a Geo-stationary orbital satellite.
The MBS2-LP must be used in accordance with the safety guidelines stated in this document. Failure to
comply could result in physical harm and can be a hazard to the health of the operator of this unit.
WARNING!
The following safety precautions must be observed during all phases of the operation, usage, service or
repair of the MBS2-LP unit.
1. The MBS2-LP must be operated at the voltages described in the unit technical documentation.
2. The MBS2-LP must not be mechanically or electrically changed or modified. Use of all
connectors should follow the guidance of the MBS2-LP technical documentation.
3. Replace fuse with same type and rating for protection against fire and damage.
4. The MBS2-LP is a Radio Frequency (RF) generating device. Do not operate the unit when
anyone is in the vicinity noted in the Safety Information section of this guide. This could result in
personal injury.
5. Do NOT operate the MBS2-LP unit in areas where explosives are in use as the RF frequency
could interfere with the operation, causing hazardous conditions. Do NOT operate the MBS2-LP
unit in areas where two-way radio communications is prohibited.
6. Use discretion when determining the MBS2-LP installation point. After installation, ensure that
all systems are functioning properly. Consult vehicle dealer for further information.
WARNING!
1. Replace fuse with same type and rating for protection against fire and damage.
2. The Wireless Matrix MBS2-LP is a RF generating device. Do not operate the unit when anyone is
in the vicinity noted in the Safety Information section of this guide. This could result in personal
injury.
3. Do NOT operate the MBS2-LP unit in areas where explosives are in use as the RF frequency
could interfere with the operation, causing hazardous conditions. Do NOT operate the MBS2-LP
unit in areas where two-way radio communications is prohibited.
4. Use discretion when determining the MBS2-LP installation point. After installation, ensure that
all systems are functioning properly. Consult vehicle dealer for further information.
CAUTION!
1. READ THIS MANUAL IN ITS ENTIRETY!
2. Keep all original Packing Materials.
3. Use caution when installing screws or drilling through the body of the vehicle to avoid puncturing
critical areas.
4. Install included grommets and weather sealant to protect cable integrity and weatherproofing the
area of penetration.
5. Follow the instruction enumerated in the Installation Section of this guide to ensure proper
hardware installation.
6. Ensure that the MBS2-LP is installed in an area with sufficient overhead clearance where it will
NOT collide with any other surfaces and in a location that will NOT affect the RF transmission.