Installation Instructions

Wireless Matrix MBS2-LP Installation Guide Document MBUD-0088v1
March 04, 2004 Page 4
INSTALLATION INSTRUCTIONS
The following instructions explain the processes for installing the antenna, power-data cable and the power
extension cable. The installation process may vary slightly if the vehicle’s design or accessories will not
permit the execution of the steps outlined below.
Antenna Installation
Ensure there is not a height obstruction. Mount the antenna so that it is level. The highest point of any
peripheral metal object must fall below an ascending 15-degree angle that begins at the horizontal and
vertical center of the antenna; see figures 1 and 2. Wireless Matrix recommends placing other antennas,
e.g., CB or cellular, at least 3-feet from the antenna mount.
Figure 1. Maximum Obstruction Height
Figure 2. Typical Antenna Mount Location