User's Manual

PAC Configuration Manual
Wireless Matrix Corporation #102, 1530 - 27 Avenue NE Page 52 of 62
Document # xxx-xxx-xxx Calgary, AB, Canada T2E 7S6
2002.02.01 Ph. 403.250.3949 Fax [phone] www.wrx-ca.com
F4 0:Relative offset, 1:Absolute time
TYPE INT
F1 23 Poll Digital Input Status
F2 Line number
TYPE DISCRETE
F1 45 Poll Calibration results
F2 Channel #
F3 Phase (0:"ZERO", 1:"SPAN")
TYPE FLOAT
F1 54 Poll Auxiliary Averages
F2 Channel #
F3 Hour/Min
F4 0:Relative offset, 1:Absolute time
TYPE FLOAT
F1 55 Poll Auxiliary Averages
F2 Channel #
F3 Hour/Min
F4 0:Relative offset, 1:Absolute time
TYPE INT
F1 56 : Poll Averages
F2 Channel #
F3 Interval (minutes)
TYPE FLOAT
F1 66 Poll Most recent base average
F2 Channel #
TYPE INT
F1 0202 Set Time
TYPE ULONG
Reading this IO point will trigger a time set command. The PAC current local time is sent to
the RTU. Note: As time synchronization between the PAC and the RTU is VERY important.
It is recommended that this point be placed in separate pollset, which execute once per day.
F1 0505 Power Failure Log (Most recent)
F2 0:Failure Down Time, 1:Failure Up Time
TYPE ULONG
F1 0910 Poll Most recent instantaneous reading