User's Manual

PAC Configuration Manual
Wireless Matrix Corporation #102, 1530 - 27 Avenue NE Page 43 of 62
Document # xxx-xxx-xxx Calgary, AB, Canada T2E 7S6
2002.02.01 Ph. 403.250.3949 Fax [phone] www.wrx-ca.com
5.6 Spartek SS6010 Driver
RTU Driver : Spartek Systems V1.2
KeyCode : SPR
This driver will interface to the Spartek Systems SS6010 and 6010A down-hole recorder as
laid out in a document supplied by Spartek.
Driver Configuration (with default values):
RTU
TYpe SPR – Set the RTU driver to the Spartek Systems SS6010 and 6010A.
DEbug <off | on>
MAXRetries <2> – The default is 2.
RXTimeout <2> – The default is 2.
COMM
POrt < COM2> – The RTU driver must use COM2 (RS232).
BAud <9600>
DAtabits <8>
PArity <None>
STopbits <1>
SPR Driver I/O Configuration
GDN ADd <pid> <index> <address> <f1> <f2> <f3> <f4> <type>
IO Point Configuration
Address
:
not used.
F1 : Point Index - See table
below
F2 : not used
F3 : not used
F4 : not used
Type : See table below