User's Manual

PAC Configuration Manual
Wireless Matrix Corporation #102, 1530 - 27 Avenue NE Page 36 of 62
Document # xxx-xxx-xxx Calgary, AB, Canada T2E 7S6
2002.02.01 Ph. 403.250.3949 Fax [phone] www.wrx-ca.com
TN:E.S/B
Component Description
T File Type
N File number
E Element number
S Sub-element number
B Bit number
In all Allan Bradley references, a letter or letters specify the file type. The following is a list
of those representations
File Type Description F1
S Status file 132
B Bit file 133
T Timer file 134
C Counter file 135
R Control file 136
N Integer file 137
F Floating point file 138
O Output file 139
I Input file 140
St String file 141
A ASCII file 142
Note: Some file types do not support all address components. Further, some components
may be omitted.
To translate from the Allen Bradley addressing scheme to the one used by the PAC, use the
format below:
GDN ADd <pid> <index> <address> <f1> <f2> <f3> <f4> <type>
Field Description
Address PLC (Station) Address
F1 Bit Number *& File Type
F2 File Number
F3 Element Number
F4 Sub-element Number
Type (element dependant)
*Note: If a bit number is not desired disregard the bit number in F1.Some addressing requires
a specific bit address. This is accomplished by utilizing the following format for the F1 field.
YYXXX : YY - Bit number
: XXX - File type