User's Manual

PAC Configuration Manual
Wireless Matrix Corporation #102, 1530 - 27 Avenue NE Page 30 of 62
Document # xxx-xxx-xxx Calgary, AB, Canada T2E 7S6
2002.02.01 Ph. 403.250.3949 Fax [phone] www.wrx-ca.com
figure shows an example of a TPAC configuration for Modbus ASCII, 9600 baud, 7 data
bits, and even parity.
Figure 18: Configure TPAC for Modbus ASCII
Check the parameters by typing “SHow”.
Figure 19: Check Settings for Modbus ASCII
Verify the settings are correct and type “WRite” to save the settings to non-volatile memory.
The next figure is an example of a TPAC configuration for Modbus RTU, 9600 baud, 8 data
bits, and even parity.
Figure 20: Configure TPAC for Modbus RTU