User's Manual

UM04725

June 7, 2004

Rev -

Figure 4. Remote Features

To turn the unit on press the power key. To turn the unit off, press the power key again.

Note that during testing the power off function is disabled until the test time has elapsed

or enabled by the base station.

2.4 Remote Operation. The Remote units operate in concert with the base station,

therefore the base station must be powered on and communication established with the

IRESPOND application prior to Remote activation. When the Remote user turns on the

unit the device requests the user to enter his or her personal User Identification (ID) and

password using the virtual keyboard display. Upon completion of this information , the

ID and password are sent to IRESPOND. Upon recognizing the user the IRESPOND

system will pass back the test the user is assigned.

The test can be displayed to the user in two ways. First is at a summary level that lists the

test question number and shows the answer choice selected, if any. The second is a detail

question level that shows the question number, the first 20 characters of the test question,

and the answer choices below. The second level is where the user will actually take the

test. For example, the user will review the first question and decide which answer choice

to select and press the button on the hand held Remote. Once the selection is made, the

answer selected will change shape and then the SIM will move to the next question.

Periodically the Base station will poll the devices and collect information. The answers

selected by the user will be retrieved and temporarily stored by the base station. In