User's Manual

iRespond Lite Technical Manual 8
Turning Channel Hop On/Off
It is best for the base and remote units to be on the same channel. However, channel
hopping can be used to allow the remote unit to cycle through all available channels to
find a base on any channel. This is useful when using multiple bases that are set to
different channels.
1. Press the power button to turn on the Lite remote.
2. Press the Flag
button.
3. Press 2 from the numeric keypad
and press SEND .
4. When Address is displayed on the screen press SEND . (This number
should never be changed).
5. At Power press SEND .
6. At Channel press SEND .
7. At Debug press SEND .
8. When “Chn Hop” displays on the screen use the Up and Down arrow
keys to turn channel hopping on (yes) or off (no).
9. Press SEND
to save and turn off the remote.
Turning Automaton On/Off
The Automaton is for testing purposes ONLY. The automaton allows the
remote to randomly select an answer to any questions it receives
1. Press the power button to turn on the Lite remote.