SDiD 1010 User Instructions Preliminary Version V 0.1 Wireless Dynamics Inc. PDF created with pdfFactory trial version www.pdffactory.
FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Features Near Field Communication device: • NFCIP-1, ISO 18092 Compliant NFCIP-1, ISO 18092 Compliant. • Data exchange speeds of 106, 212, 424 kbit/sec. Radio Frequency Identification Reader/Writer: • ISO 14443A Compliant. • Supports MIFARE and FELICA protocols. • Data exchange speeds of 106, 212, 424 kbit/sec. Secure Data, SD, Card: • SDIO compliant, version 1.10. • SD-1, SP-4, SPI mode. Host Support: • Utilizable on terminals with SDIO enabled SD card socket.
Physical Dimensions Parameter Outline Dimensions (LxWxH): Weight: Wireless Dynamics Inc. PDF created with pdfFactory trial version www.pdffactory.com Nominal Value 52.9x24.0x2.
LED Specification The SDiD 1010 has an integrated LED that is used to indicate the card status. The following table shows the different LED states and the corresponding card status: LED Status Indicator Card Status Standby Mode Reader/Writer Mode Virtual Mode (Tag Mode) LED State OFF Two blinks every two seconds One blink every five seconds Operating Instructions 1) Insert the SDiD 1010 card into the SD card slot of the host device.
