User Manual

WIRELESS DYNAMICS INC.
220, 1925 - 18
th
Avenue N.E. Calgary, AB, Canada T2E 7T8
Tel: [phone] Fax: [phone]
www.wdi.ca www.icarte.ca
iCarte Wallet Quick Start Guide
Installation and Authentication
4. Install the application
5. Launch the “iCarte Wallet” application by pressing the “iCarte Wallet” icon.
6. The iCarte Wallet will ask for a Passcode; enter “1234”.
7. The iCarte Wallet will authenticate then verify with an “Authentication Complete” message.
NOTE: Authentication is only required once after the iCarte Wallet has been installed.
Use
Insert the iCarte into the bottom connector of the iPhone and follow the instructions below:
Enter PIN
3. When iCarte Wallet is launched, the iCarte Wallet will ask for a PIN; enter “7905”.
4. The iCarte Wallet will then go to the “Main Menu”.
The iCarte Wallet supports the following features: Payment, Discovery and Quick Payment. These
features require the iCarte to be connected to the iPhone via the 30-pin connector.
Payment
1. From the “Main Menu” press the “Make Payment” button.
2. Present the iCarte™ to a contactless point-of-sale terminal.
3. The terminal will beep when the transaction has taken place.
4. The iCarte Wallet will ask to save the eReceipt.
5. To save the eReceipt press “Yes”; to discard press “No.”