User Guide
Table Of Contents
- 1. Introduction
- 2. WCCTV Body Worn Camera
- 3. LED Indicators
- 4. Charging the WCCTV Body Worn Camera
- 5. Mounting the WCCTV Body Worn Camera
- 6. Switching the WCCTV Body Worn Camera on
- 7. PIN Screen
- 8. Home Screen
- 9. Recording Video and Audio
- 10. Standby Mode
- 11. Silent Mode
- 12. Switching the illuminating light on
- 13. LTE Status
- 14. Advanced: SD Card Status
- 15. Advanced: GPS Status
- 16. Advanced: Time and Date Status
- 17. Advanced: LTE Status
- 18. Advanced: Battery Status
- 19. FCC Radiation Exposure Statement
- 20. Interference Statement
Support Guide: WCCTV Body Worn (Connect)
8
6. Switching the WCCTV Body Worn Camera on
To switch the WCCTV Body Worn Camera on, press and hold the red button on the side
of the unit. The camera will beep once then release the button and the LED indicator at
the top of the unit will flash yellow to signify it is powering up.
7. PIN Screen
When the WCCTV Body Worn Camera is powered on you will be presented with a
screen that required you to enter a PIN code.
This PIN code will be provided by WCCTV to the Company’s administrator.
Enter the PIN code using the units touch screen and then press the ‘’ to access the
units home screen.
If you make a mistake whilst entering the PIN code use the back arrow which has an ‘x’
on it.