User Guide
Table Of Contents
- 1. Introduction
- 2. WCCTV Body Worn Camera
- 3. LED Indicators
- 4. Charging the WCCTV Body Worn Camera
- 5. Mounting the WCCTV Body Worn Camera
- 6. Switching the WCCTV Body Worn Camera on
- 7. PIN Screen
- 8. Home Screen
- 9. Recording Video and Audio
- 10. Standby Mode
- 11. Silent Mode
- 12. Switching the illuminating light on
- 13. LTE Status
- 14. Advanced: SD Card Status
- 15. Advanced: GPS Status
- 16. Advanced: Time and Date Status
- 17. Advanced: LTE Status
- 18. Advanced: Battery Status
- 19. FCC Radiation Exposure Statement
- 20. Interference Statement
Support Guide: WCCTV Body Worn (Connect)
14
15. Advanced: GPS Status
Pressing the GPS icon on the main screen of the WCCTV Body Worn Camera will bring
up the following information: if the unit is connected to GPS.
If the GPS Icon shows a cross running through it, this means there is no GPS fix as
shown below, to gain GPS simply go to an area that has better signal, for example
outside, a room with windows and doors.
Please note: The GPS may be turned off which is a feature in the firmware build.