User Guide
Table Of Contents
- 1. Introduction
- 2. WCCTV Body Worn Camera
- 3. LED Indicators
- 4. Charging the WCCTV Body Worn Camera
- 5. Mounting the WCCTV Body Worn Camera
- 6. Switching the WCCTV Body Worn Camera on
- 7. PIN Screen
- 8. Home Screen
- 9. Recording Video and Audio
- 10. Standby Mode
- 11. Silent Mode
- 12. Switching the illuminating light on
- 13. LTE Status
- 14. Advanced: SD Card Status
- 15. Advanced: GPS Status
- 16. Advanced: Time and Date Status
- 17. Advanced: LTE Status
- 18. Advanced: Battery Status
- 19. FCC Radiation Exposure Statement
- 20. Interference Statement
Support Guide: WCCTV Body Worn (Connect)
13
Indication Colour
Yellow SD Card SD Card is nearly full
Red SD Card SD Card is full
Cross through SD Card
SD Card is not inserted or inserted
incorrectly
SD Card SD Card is fully functional
If the SD Card shows a cross going through it; turn off the unit and at the bottom the
WCCTV Body Worn Camera you will see a casing, pull this casing down and push the
SD card to ensure it comes out and then place back in with the SD cards’ gold contacts
facing down. Turn the unit back and check SD status.