Installation Guide

Professional Installation Guide http://docs.google.com/View?docID=ddwnvg4z_35c8h97t&revision=_la...
4 of 6 9/5/2007 8:01 AM
Antenna Type
Due to FCC restrictions the professional installer must ensure that only directional patch type antennas
of gains with less or equal of 18dBi are used. For these antenna this device does not require manual
power limit settings since the maximum output power of the AIRcable Host XR is under 20dBm.
Application
The FCC restricts the use of directional antennas to fixed point-to-point operation. The antenna must be
installed on a pole using the supplied mounting hardware per drawing below.
The omni-directional antenna must be used directly connected to the AIRcable Host XR without a cable
pig-tail. Screw on the antenna to the antenna port of the device and align the antenna vertically.
Only antennas of that type with gain of less or equal 18dBi (directional) and less or equal 9dBi
(omni-directional) are certified by the FCC and allowed to use with the AIRcable Host XR.
Antenna Model Antenna Gain
HyperLink HG2418 18dBi directional
Boboto TLB-2400-9B 9dBi omni-directional