Installation Guide

Wireless Cables Inc.
2880 Zanker Rd, Suite 203, San Jose, CA 95134
T 408.850.1884 ~ F 408.228.0687
[e-mail] ~ www.aircable.net
Software Specification
Hardware Specification
BASIC Interpreter
Line numbers: 1-2047
Line length: 32 characters
Loop nesting: 6
Subroutines: 8 levels
Expressions: -32768 to 32767, 16-bit
Variables: 25, ‘A’ - ‘Y’, variable ‘Z’ used for debugging
String variable: $0 volatile 80 bytes long
String variables: $1-$2047, 32 byte length
Character size: 8 bit
Expression parser recursive, maximum of 5 levels
File system: BASIC and config file independent
PIN code limit: 15 characters
Programmable from other AIRmote devices
Programm load from standard file system
Event Handling
PIN code request
Incoming SPP connection
Outgoing SPP connection success
Sensor readings (connection quality, temperature, analog input)
Incoming vNote through OBEX
Inquiry results
SPP control indicator (DTR signal)
PIO change event
Timer messages
Interrupt Routines
2 levels: high priority interrupt: stops BASIC program execution
low priority: schedules execution
Bluetooth
Bluetooth 2.1 certified, with 802.11 tolerance
EDR supported where available
Profiles
master and slave mode simultanously
Two SPP profiles for streaming data at the same time
OBEX/FTP for file transfer of BASIC and config file
FTP server profile
OBEX vNote item transfer for messages
OBEX vCard business card exchange
OBEX server and OBEX client profile
up to 4 multiple connections at the same time
Security control, pairing and un-pairing functions
Certifications
Bluetooth certified (BQB)
FCC and IC module certification
CE certified
RoHS compliant
Sensor Interfaces
Parallel IO ports, 16 ports TTL level, 5V tolerant
Security overwrite port
2 analog input
UART configurable 1200 to 1382400 baud, parity and stop bits
I2C master interface, fast mode
SPI via general purpose PIO
Built-in Functions
powerful high level Bluetooth functions, slave connect, master, send
biz card,
hardware control, pio input/output, uart, baud rate, sensor, date
string operations, hex and ascii conversion, compare, length
input and output, on 2 SPP, 1 UART, files and virtual string
data logging
LCD 8 character display via I2C
File system
access to application BASIC program
read/write configuration file
wireless file transfer (OBEX), up/downloadable
Performance
max 2000 lines per second
standard: 100 lps
scheduler resolution 10ms
max 350kBit/s streaming data
recommended max average: none
fastest connect time < 2s
FTP file system: 16 kbps,
Radio
Device name configurable
Bluetooth class configurable
Max and default transmit power configurable
Scan modes configurable to as low as 30uA power consumption
Sniff mode configurable (soon)
Firmware
112000 words code size operating system
RTOS for baseband radio
Customizations
additional embedded functions
audio profiles (audio gateway, headset, handsfree)
networking profiles (TCP)
web server
Processor
BlueCore 5MM with DSP, 8BMit internal flash, 512kBit EEPROM
Size
14.5 mm x 24.5 mm
Pins
vertical 2 rows of 18 pins, 2 horizontal rows of 11 pins
spaced 1.27 mm
SMD pad mounted
Uart
1200 to 1382400 baud, 3.3V TTL level, 5V tolerant
Antenna
connection
50 Ohm Impedance
Power Supply
5V regulated stand-alone
Lithium rechargeable battery, 4.2V, 100-500mAH
3V primary cells
Battery Charger
25mA-100mA configurable Lithium battery charger
requires current protected Lithium rechargeable batteries
Power consumption
30uA sleep, 11mA with connection, up to 250mA peek
Input and Output
16 digital input/output lines (3.3V TTL, 5V tolerant)
2 analog input lines (0-1.8V)
2 LED current sinks, 4.2V tolerant
Asynchronous
serial
1200-1382400 bps, 8 bit, none-odd-even parity, 1 or 2 stop bits
Radio
raw output power: 20dBm
receiver sensitivity: -96dBm
range 200m
Sensor Interfaces
real time clock DS1372
temperature sensor TC54
16bit adc ADS1112
LCD controller PCF8562
general I2C and SPI master
Certifications
Bluetooth certified (BQB)
Bluetooth 2.1 Standard (802.11b tolerant)
FCC module certification
CE certification (pdf)