Product Manual

Stinger User Manual Page 8 of 33



• Leave the unit mounting means loose enough to allow for movement when performing the
alignment procedure. They must be tightened after the alignment procedure is completed.
Classic Stinger
Super Stinger
Important Note about EIRP Limitations and Transmitter Power Settings
Stinger Type Antenna Gain Transmitter
Power Settin
g
EIRP
(dBm)
EIRP
(watts)
Bare Stin
g
er 8 dBi +25 dBm
(
max
)
33 dBm 2
Classic Stinger 14 dBi +22 dBm 36 dBm 4
Super Stin
g
er 18 dBi +18 dBm 36 dBm 4
Stin
g
er Reflector RCL1 19 dBi +17 dBm 36 dBm 4
Stin
g
er Reflector RCL2 20 dBi +16 dBm 36 dBm 4
Stin
g
er Reflector RCL3 22 dBi +14 dBm 36 dBm 4
In order to comply with FCC EIRP limits, the transmitter output power may
need to be reduced depending on the antenna configuration.

As with any such installed devices, the Stinger subscriber module and the Ethernet cable must be
grounded in accordance with the latest revision of the National Electrical Code (NEC) and/or all