Product Manual


SPECIFIC A TIONS

Operating
Frequency
Ranges
2.4 Modules: ISM 2.4 to 2.4835
GHz
Access Method TDD/TDMA
Signaling Rate 10 / 20 Mbps
Modulation Type High Index 2-level and 4-level Frequency Shift
Keying
(FSK) (Optimized for interference
Carrier to
Interference (C/I)
also known as Jitter
3dB
nominal
Receiver Sensitivity -83dBm 10
-4
BER
Operating Range
(All
Weather)
Up to 15 miles (24 km) with passive reflector in the 2.4 GHz band.
Transmitter Power Meets FCC U-NII/ISM and IC LELAN ERP Limit
DC Power
measured at DC
converter
0.3A @ 24 VDC (7.2 watts)
typical
Interface 10/100 BaseT, half/full duplex
Rate auto negotiated (802.3
compliant)
Protocols Used by
Stinger
IPV4, UDP, TCP, ICMP,
Telnet,
HTTP, FTP, SNMPv2c, DES
Protocols
Supported by
Stinger
Switched Layer 2 Transport with support for all common Ethernet
protocols
including IPV6, NetBIOS, DHCP, IPX, etc.
Software Upgrade
Path
Remotely downloaded into FLASH via RF
link
Network
Management
HTTP, TELNET, FTP,
SNMP
Temperature
-40 ° C to +55 ° C (-40°F to +131°F)
Dimensions 11.75” H x 3.4” W x 3.4” D (29.9 cm H x 8.6 cm W x 8.6 cm D)
Weight 1 lb. (.45kg)
Hardware Warranty in U.S.
WB Manufacturing U.S. offers a warranty covering a period of one year from the date of purchase by the customer. If a product is found
defective during the warranty period, WB Manufacturing will repair or replace the product with the same or a similar model, which may be a
reconditioned unit, without charge for parts or labor.

IN NO EVENT SHALL WB MANUFACTURING BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT,
GENERAL,
SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGE ARISING OUT OF THE USE OR
INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS, OR FROM
ANY BREACH OF WARRANTY, EVEN IF WB MANUFACTURING HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. (Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above exclusion or
limitation may not apply to you.) IN NO CASE SHALL WB MANUFACTURING’S LIABILITY EXCEED THE AMOUNT YOU PAID
FOR THE PRODUCT.

