Product Manual


display information when the module is registered to an access point module and the value is only
updated by either refreshing the web browser screen or configuring the Stinger module to auto-
refresh (see Configuration web page.) The value range for Jitter is 5-15, with the quality being
better on the low end of the scale. Jitter must be below 9 for a link to be of acceptable quality.

Air Delay: display the distance from the subscriber module to the registered access point module.
At close range, 0-200 feet, the distance will not report accurately.

Radio Slicing Value: displays information to be used by Stinger technical support.

Radio Transmit Gain Setting: displays information to be used by Stinger technical support.

Site Name: displays information relating to the name of the physical module. This parameter can
be set by the operator on the Configuration web page. This information is set into the sysName
SNMP MIB-II object and can be polled via a SNMP management server.

Site Contact: displays contact information for the physical module. This parameter can be set by
the operator on the Configuration web page. This information is set into the sysContact SNMP MIB-
II object and can be polle