Product Manual


THE INTERFACE SCREENS
The Stinger subscriber module contains a series of web pages that are used to interface to the unit.
The following is a quick reference to interface screens.
Note: These screens are subject to
change by subsequent software versions. To access the web based interface you first must be on
a computer that is in some way connected to the subscriber module. This can be done either
directly or through a network. Enter the IP address of the subscriber module (default is
169.254.1.1) into the address bar of your browser and hit enter on your keyboard. The
following
web based interface pages are accessible:

• Status
• Configuration
• Event Log
• AP Eval Data
• Ethernet Stats
• Expanded Stats

The default page, when accessing the IP address of the Stinger unit is, the Status page.
STATUS P A GE


The Status page contains information on the operation of the product. It is the default webpage.
The following parameters are displayed:

Device Type: displays the type of Stinger module that is currently being viewed. This field will let
the operator know the frequency band of the module, the protocol that it is utilizing, and the MAC
address of the module. The protocol for a subscriber module is multipoint . The MAC address will