Installation guide

2. Operating the SBS
enter an IP address instead. The SBS is shipped with the default IP
address of 192.168.1.1, so try typing “http://192.168.1.1” instead of
“wiredocean”.
Make sure that your computer is set to request an IP address from
the SBS using DHCP. If not, see Sections 4.1 and 5.1 of this
handbook.
2.3 Navigating Around the SBS User Interface
The User Interface functions are grouped under three tabs:
 The CONNECT tab is used to connect and disconnect from
the internet and to view the status of the current connection.
 The SETTINGS tab is used to manage the SBS and view SBS
status information under three tabs:
► The UPLINK tab allows editing of existing uplinks and
creation of new uplinks.
► The DOWNLINK tab provides downlink status
information.
► The GENERAL TAB provides access to SBS network
addresses, SBS status information, the update button
and the shutdown button.
 The STATS tab allows access to historical usage information.
Page 5