User manual

8
WINYCAM V300HD
How to record
1. Recording: V300HD is automatically booted at power on, and recording starts in basic normal recording mode.
2. Recording Mode: it is classified into driving recording mode and parking (motion) recording mode
3. Recording Method: it is classified into normal recording, event recording, motion recording.
※ For automatic recording and manual recording methods, please refer the below table.
※ after change to parking recording mode by manual, if you want to change normal recording mode again, please press
“REC” button for 3 seconds (during event recording, mode cannot be changed.)
Recording
mode
Recording
method
Auto recording method
Manual recording
method (button
control)
Recording time
Recording
folder
Driving
recording
mode
Normal
recording
- -
Set on configuration
30 / 60 / 120 sec
Normal
Event recording In G-sensor detect Shock
One short press
button
Each 15
second
recording
before and
after event or
motion
occurrence
* For HD highest
quality resolution
only,
each 10 second
recording before
and after event or
motion occurrence
Event
Parking
(motion)
recording
mode
Motion
recording
In G-Sensor is not
detected for more than 8
minutes Automatic motion
recording mode change
3 second long
press button
Motion
Event
Event recording In G-sensor detect Shock
One short press
button