User manual

- 7 -
[5-2-2. Mpeg Codec]
Set up what Mpeg Codec the image is compressed.
[5-2-3. Quality]
Set up the image quality.
Select NORM (normal quality) / HIGH (high quality) / LOW (low quality)and press Ｍ to
save.
[5-2-4. Resolution]
Set up the image resolution. Select <<320*240>> /<<640*240>> / <<640*480>> and press Ｍ
to save. The resolution is different when external camera is used.
◎ Differences of resolution between built-in camera and external camera ◎
CIF (QVGA)
Half D1
D1 (VGA)
Built-in camera
320*240
640*240
640*480
External camera
352*240 (NTSC)
352*288 (PAL)
704*240(NTSC)
704*288(PAL)
704*480 (NTSC)
704*576 (PAL)
[5-2-5. Frame]
Set up the Record Frame Rate. High Frame rate produce more frequent image.
NTSC : 1/3/6/10/15/30F, PAL : 1/3/6/8/12/25F (each 6 ranges)
Frame is different depend on external camera
[5-2-6. Rec Time]
Set up Rec Time as Normal Mode. Select 1 or 5 or 10min and press Ｍ to save. As Car
Mode with G-sensor, file will be made even 1 minute.
[5-2-7. Rec Volume]
Select 1 (within 1 Meter) or 2 (Within 5 Meter) or 3 (Within 10 Meter) / MUTE, and press Ｍ to
save. When record in inside, we recommend setup 1 or 2.
[5-2-8. Rec ALC ]
Set up mode to protect cracking sound during recording. (Maintain the sound tone)Select
<<YES>> (ALC) or <<NO>> (No ALC) and press Ｍ to save.
※ To setup quite room, the noise might be heard because sound will be amplified.