User manual

- 10 -

[5-3-7. Orientation]

Depend on when it is installed, can set up inversion image each built-in and external camera.

Select <<DESKTOP>> (LCD is an upward direction) or <<CEILING>> (LCD is turned over.)

[5-3-8. Screen Save]

Set up screen save function to save a battery

<<YES>> The display turns off automatically after 20seconds last key is pressed.

Recording or power off can be confirmed LED light.

(Flash light green = Recording, Light green= Stand-by motion REC mode, Red = Stand by)

<<NO>> Display power is always ON.

[5-3-9. Languages]

Set up language

Select <<English>> or <<한국어>>(Korean) / <<日本語>>(Japanese) and press Ｍ to save.

[5-3-10. Buzzer]

Set up sound / Sound-off of key operation.

Select <<YES>> (Sound) / <<NO>> (Sound-off) and press Ｍ to save.

[5-3-11. Setup G-sensor]

The value of 3D coordinate can be changed. Press or to move X, Y, Z, and setup the

value with pressing or . Press Ｍ to save. Initial setup value is X : 1.0 / Y : 2.4 / Z : 2.4

* Above is the value of change for shock level by each 10ms.

1G = 9.8m/s^2

* Basic setting value is recommended to use.

* Note: CAR MODE ONLY

* Lower setup value is more sensitive for shock.

[5-3-12. Set Default]

Format PDVR. Select <<YES>> (formatting) / <<NO>> (No formatting) and pres Ｍ

ㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍㅍ to save.

※ The data in SD card can not be formatted.