User manual

Item Description
Mode Setup Selects normal recording mode or event recording mode when driving, and while event recording is set, the data by event recording mode
will be stored. (Default: Normal mode)
Driving Mode Frame Rate Sets the frame rate for driving. (Default: 30F) the higher frame rate is set, the movement image will be saved more smoothly.
Time Setting Sets the current your time. when setting time in PC, please add travel time between the location you set time on PC and the location you
apply set time to black box in a car. (PC -> Travel time -> Car). (When using GPS bracket, time setting will be automatically applied.)
Resolution Sets the size of image resolution. HD 1280*720 (Default) / D1 720*480 / VGA 640*480
Parking Mode Frame Rate Sets the frame rate when parking (Default: 15F)
Set Time? The time set in [Time Setting] will be applied to black box. Only when changing the time set, select "Yes". (Default: No)
Normal Recording Time 30 seconds / 1 minute (default) / 2 minute. You can set recording time.
Parking Recording Mode Change If there is no detection on G-sensor for over a certain time (approximately 8 minutes), it will be automatically switched to parking recording
mode, but if any detection on G-sensor for over a certain time (about 10 seconds), it will be automatically switched to driving recording mode.
LED Lightning Setting Sets the front LED display or not.
Video Quality Sets the quality of recording images.
Voice Guide Volume Level Sets volume level for voice guide.
Motion Sensitivity Sets the sensitivity level of motion detection sensor.
G-Sensor Sensitivity Sets the sensitivity level of shock detection sensor.
Recording Volume Level Sets the volume level of the recording voice.
Overwrite Function(Event/Motion) Deletes the oldest data and sets to overwrite them with a new file.
Car Constant Power Discharge
Protection
No Use: no use this function
Unlimited time use: when a power voltage keep below voltage value for 30 sec, power will off automatically.
Value of cut off voltage ：(12V car standard voltage: 11.8V±0.3V, 24V car standard voltage : 24V±0.5V)
After power off by this function, recording will start if voltage will be over below value.
Voltage to start power ：(12V car standard: 12.5V±0.2V, 24V car standard: 25.5V ±0.5V)
2/4/8/12/24/36/48 time setup : After change parking mode, a recording can keep until setup time. After passed
setup time, if a voltage is under a value of cut off voltage, power will off.
SD card Folder Capacity Adjustment Adjusts storage space ratio by recording folder in the entire SD card storage capacity.
9-2. Original Viewer – Configuration