Ver. 02 V300HD User Manual WINY Technology Co., Ltd. http://winycam-eng.
Contents # Precautions - Precautions for safety when using the product 3p - Precautions when using a SD card 4p - Precautions when using a Battery 5p 1. Package 6p 2. Product Features 7p 3. Function 8p 4. How to Install 9p 5. How to Record 10p 6. LED Operation Guide 11p 7. Voice Guide 12p 8. How to Install Original Viewer Program 13p 9. Original Viewer - Screen Configuration 14-15p 9-1. Original Viewer – Viewer Setup 16-17p 9-2. Original Viewer – Configuration 18-19p 9-4.
Precautions for safety when using the product 1. Please do not operate the product during driving. It may cause accidents. 2. Please install the product in a place not to interfere with a driver's view. 3. Do not disassemble or convert the product intentionally. It may lead to product failure and the responsibility for the damage to the product resulting from this shall be borne by the user. 4.
Precautions when using a SD card 1. In order to confirm normal operation of the product, please check the image of a SD card and format it on a regular basis. (PC format needed one to two times per month) 2. Because an SD card is consumables, if it is used for a long time, you may lose the data or may not record due to an error, so please check it periodically. 3. When the product is in recording or the power is on, do not eject the SD card forcibly. It may cause a failure of the SD card and data loss. 4.
Precautions when using a Battery ※ Please follow below otherwise Heat Generate, Fire, Explosion, etc might happen. 1. Contact the manufacture or distributor if battery bellowed up even by the naked eye. 2. Use only packaged battery and do not modify and disassemble. 3. Never put this built-in battery product close to fire. 4. Do not leave product for long time inside the car in summer. 5. Use Warranted lithium polymer portable charger by manufacture. 6. Do not disassemble, crimp, destroy. 7.
1. Package Package Body & Bracket Car Cigar jack Package Cabling Clip 3pcs Micro SD card Card Reader User Manual Option Accessory Video Cable GPS Bracket (Selling separately) (Selling separately) The viewer program is stored in Micro SD card. Please use after saving the program in advance in the computer, etc. so that the program can’t be deleted. (If it is deleted, you can download it from our website.) The packaged product picture of the user manual may differ from the actual product.
2. Product Features 1. 2 Mega Pixel image sensor mounting. 2. 150 degrees (based on lens) wide mega lens (based on actual recorded video) are applied. 3. HD (1280X720) resolution and 30FPS are supported. 4. Security LED light are mounted on front body (LED Lighting function On/Off can be set in PC viewer) 5. Car constant power discharge protection function (setup is available in PC viewer) is built-in. Separated power discharge safety equipment is not necessary. 6.
3. Function 1. Bracket (GPS Bracket: Selling separately) 8. Microphone 2. Up-down adjustment screw 9. Record LED 3. Security LED 10. Power LED 4. Camera Lens 11. Speaker 5. GPS Connection 12. Record Button (for manual) 6. External Video Cable(Selling separately) 13. Micro SD card Slot 7.
4. How to Install Insert the Micro SD card into the product. (Note the direction of the SD terminal) Clean foreign substance in a place to attach the product first and attach the product. Connect packaged cigar adapter to the power connecting terminal. Connect cigar jack to the car cigar socket. Remove protective sticker on the double-sided tape of the bracket.
5. How to record 1. Recording: V300HD is automatically booted at power on, and recording starts in basic normal recording mode. 2. Recording Mode: it is classified into driving recording mode and parking (motion) recording mode 3. Recording Method: it is classified into normal recording, event recording, motion recording. ※ For automatic recording and manual recording methods, please refer the below table.
6.
7. Voice Guide Situation Voice Guide Event / Motion Occur (Alarm Tone) “Ding-Dong” Remove SD card / SD card Error “Please check a SD card.” Firmware Update Start “Firmware will be updated.” Firmware Update Completed “Firmware update has been completed.” Normal Recording Mode Start “Normal recording will start.” * Event Recording Mode Start “Event recording will start.” Parking Recording Mode Start “Parking recording will start.” Recording End “Recording will be end.
8. How to Install Original Viewer Program 1. 2. - System Requirements Windows XP(32bit), Windows Vista(32bit), Window7(32/64) Pentium 4 2.8GHz & RAM 1GB . 1024 * 768 Display device is set to be the primary monitor. DirectX Support (WPF) Install Playback program is in packaged SD card. Insert this SD card into the USB card reader and connect to the computer. An executable file is in the SD card as below figure. If you run “setup.exe”, Winy BB Viewer will be installed.
9.
9. Original Viewer – Screen Configuration 1 [1Ch], [2Ch] Select channel and it will playback.
9-1.
9-1. Original Viewer – Viewer Setup Item Description JPEG stores location Set location for captured JPEG image. Language Select language. Playback mode Select display channel. Repeat Select repeated playback. App Location Select App is always the top of another window. Video Reverse Select video reverse. Device Select Select the model. Video Adjustment Control Brightness/Contrast/Chroma. Volume Control recording volume level.
9-1.
9-2. Original Viewer – Configuration Item Description Mode Setup Selects normal recording mode or event recording mode when driving, and while event recording is set, the data by event recording mode will be stored. (Default: Normal mode) Driving Mode Frame Rate Sets the frame rate for driving. (Default: 30F) the higher frame rate is set, the movement image will be saved more smoothly. Time Setting Sets the current your time.
9-3. Configuration Default Settings Item Settings Item Settings Mode Setup Normal Driving mode Frame Rate 30 Resolution HD (1280 x 720) Parking Mode Frame Rate 15 Time Setting The time setting value on PC will be output.
10. Configuration Setting and playback video on Smartphone * Android ONLY Recorded video by V300HD can be played back and delete as well as setting configuration on a smartphone which support only Android. Installation 1. V300HD can work in all Android Smartphone that support over Froyo (2.2) version. 2. Download the application of “Winycam V300HD” on Android Market. How to use Connect SD card to your smartphone Insert Micro SD Card to SD Card socket on your Smartphone and run the application.
11. Firmware Update Firmware Update Remove the SD card from the black box after turning off the power completely. Copy the firmware file to the top position of the files in the SD card after connect the SD card to the PC. Boot the power in the black box after inserting the SD card into a black box, If the firmware file is automatically recognized, start to update the firmware after the voice guide to indicate the start of the firmware. 5.
13. Specifications Item Specifications Camera 2 Mega pixel, view angle Item (150 degrees) Specifications Video Output NTSC Composite G-Sensor 3-axis acceleration G Sensor built-in Voice Recording Microphone built-in GPS An external GPS module (optional) Voice Guidance Speaker built-in Video Compression H.
Warranty ■ Warranty 1. The products are manufactured through the strict quality control and inspection process. 2. The defect occurring in normal use of user within the warranty period will be repaired free of charge. ■ Warranty Details (Conditions) Free Service: The defect occurring under normal use within the warranty period from the date of purchase will be repaired free of charge. Paid Service: If the warranty period has passed.
