User’s guide Pioneering pen computing Tablet LCD Monitor Centurion TM series www.wintime.com.
FCC compliance statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications.
Contents Contents Pioneering pen computing Chapter 1 Introduction .......................................................................... 2 Hardware installation ........................................................... 3 Chapter 2 Installing the device driver into Windows Me / 2000 / XP... 5 Chapter 3 Installing the device driver into Windows 98 ...................... 7 Chapter 4 Customizing the digital pen ................................................
Chapter Chapter 11 Pioneering pen computing Introduction Thank you for purchasing the Centurion tablet LCD monitor, which allows you to work directly on the screen and offers an alternative to keyboard and mouse. You can navigate your cursor, and design, paint, draw, write or sign in an intuitive and natural way by means of Wintime’s exclusive wireless and pressure sensitive digital pen.
Hardware installation Hardware installation Box contents The Centurion package contains the following items. If you find any items lacking, please contact your dealer immediately. Store all packing materials and accessories in a safe place in case the product needs to be shipped in the future.
Hardware installation 5. Connect the power cord to the power adapter and the power plug to the mains power outlet. 6. Connect the USB connector of the USB cable to the USB port of your monitor. Installing the digital pen battery 1. Turn both parts of the digital pen as indicated. 2. Pull both parts apart as shown. 3. Carefully push the AAA battery into place, with the plus pole to the right. Tip: Alkaline batteries last significantly longer.
Chapter Chapter 22 Pioneering pen computing Installing the device driver into Windows Me / 2000 / XP If you have previously had another graphics tablet installed, or you are reinstalling the tablet LCD monitor driver, you must first remove the present driver from your system. Please refer to Appendix A for instructions. What you need for this installation: the Tablet LCD Monitor install CD-ROM 1. Switch on your computer and connect the USB connector to the USB port of your computer 2.
Installing the device driver into Windows Me / 2000 / XP 6. In the Wintime Tablet Setup screen click the Finish button.This will then install the device driver. In some setups of Windows 2000 and Windows XP a Microsoft Digital Signature warning may appear on your screen. Click Yes to continue the installation. 7. Setup is complete, click OK, and you may now use your tablet LCD monitor. Note: Please refer to Wintime’s website at www.wintime.com.tw for tutorials to get you started.
Chapter Chapter 33 Pioneering pen computing Installing the device driver into Windows 98 If you have previously had another graphics tablet installed, or you are reinstalling the tablet LCD monitor driver, you must first remove the present driver from your system. Please refer to Appendix A for instructions. What you need for this installation: the Tablet LCD Monitor install CD-ROM your Windows 98 install CD-ROM 1. Switch on your computer and connect the USB connector to the USB port of your computer 2.
Installing the device driver into Windows 98 6. Insert your Windows 98 CD-ROM in the CD-ROM drive. In the dialog box that opens, click on the Browse button. 7. In the Drives field select your CD-ROM drive (e.g. e:) In the Folders field select Win98. Click OK and then OK again. In the following screen click on the Finish button. 8. Remove your Windows 98 CD-ROM and replace it with the Tablet LCD Monitor install CD-ROM.
Installing the device driver into Windows 98 11. In the Wintime USB Tablet Setup screen click the Finish button.This will then install the device driver. If you are prompted to restart your computer click Yes. 12. Setup is complete, click OK, and you may now use your tablet LCD monitor. Note: Please refer to Wintime’s website at www.wintime.com.tw for tutorials to get you started.
Chapter Chapter 44 Pioneering pen computing Customizing the digital pen There are three buttons on the digital pen: Stylus tip -This button works like the left-click of a mouse. Lower button -This button works A the right-click. Upper button -This button works like the double-click.
Customizing the stylus pen . . Response Here you can adjust the double-click speed as well as the size of the double-click area. For a best result please drag the Area slider to the middle.You can test the result of the new settings in the Test Area. Pressure The pressure sensitivity of the tablet LCD monitor can be adjusted in this tab. It is recommended to move the Click Threshold slider to the most left position (Soft) for optimum pressure sensitivity.
Appendix A Pioneering pen computing Removal of previous graphics tablet drivers Windows 98 / Me 1. Click Start > Settings > Control Panel > Add/ Remove Programs 2a. Select the tablet driver. Click Add/Remove > OK > OK > OK. Restart your computer. Windows 2000 Windows XP 2b. Select the tablet driver. Click Change/ Remove > Finish. Restart your computer 2c. Select the tablet driver. Click Change/ Remove > Finish.
Appendix Appendix B B Pioneering pen computing On screen display (OSD) settings zBRIGHTNESS: Press > to increase or < to decrease brightness. zCONTRAST: Press > to increase or < to decrease contrast. zDISPLAY ADJUST: Press > or < to select the geometry submenu. V-POSITION: Press > or < to move the image up or down on the screen. H-POSITION: Push > or < to move the image to the left or right on the screen. PITCH: Press > or < to adjust the video pitch for maximum focus and visibility.
Appendix C C Appendix Pioneering pen computing Taking care of your tablet LCD monitor 1. Always disconnect the power cord from the Centurion tablet LCD monitor before making any installation. Make sure both the system and external devices are turned off, and that the monitor is properly grounded. 2. Turn off the system power before cleaning. Clean the system using a cloth with some mild detergent only.
Appendix D Pioneering pen computing Product Specifications General Screen adjustment Focus, brightness, contrast, horizontal / vertical position, horizontal size Power requirement DC 12 Volt / 36W Power consumption Under 36W Power adapter 100-240V, 50 ~ 60 Hz (High power, model: HPA-501242U3 A8) Power cord USA No. of ports USB, DC input jack Connectivity Attached cable (RGB) Platform support Window 98 / Me / 2000 / XP Weight 6.
