User Guide

NTRecover
Winternals Software LP Page 2
2 Overview of Use
The following steps are required for NTRecover operation. Each is described
in detail in subsequent chapters of this guide:
♦= Connect the host and client machines with a null-modem serial cable
♦= Identify the serial ports that are connected
♦= Run the NTRecover host software, NTRecover, on the host computer
♦= Create a client boot floppy
♦= Boot the client machine from the boot floppy and execute the client
software
♦= Enter the communications parameters into the host and the client
software
♦= Press the mount button on the host
♦= Pull down the drives menu in the host software to see which host
drives correspond to client drives
♦= Access the drives as you would standard drives
♦= Dismount the client drives