User Guide

Locksmith
Winternals Software LP Page 2
2 Requirements
You must have the following components in order to install and run
Locksmith:
♦= A full copy of Remote Recover or NTRecover
♦= A Windows NT Workstation or Windows NT Server installation, which
will act as a host
♦= A Windows NT Workstation or Windows NT Server needing recovery.
This machine is the client.
♦= A standard null-modem cable (9- pin female to 9-pin female)
♦= One formatted 1.44MB floppy disk.
The two machines involved in the password recovery must run approximately
the same version of Windows NT/2000, such that the host and client versions
fall into one of the following groups:
Table 2-1
NT 3.51 Service packs 0-5
NT 4.0 Service packs 0-2
NT 4.0 Service packs 3-4
Windows 2000 RTM