User Guide

ERD Commander 2002
Winternals Software LP Page 47
20 Using TCP/IP Configuration
When you boot a computer with ERD Commander 2002 it starts the network
adapters on the system using a default configuration that assumes that you
have a DHCP server on your network from which an IP address, gateway,
and DNS servers can be obtained. If your network requires explicit
configuration of any of these values, use the ERD Commander 2002 TCP/IP
Configuration utility (Figure 20-1) after logging in to the system you wish to
repair. TCP/IP Configuration is accessible in the Administrative Tools folder
of the Start menu.
Figure 20-1