User Guide

ERD Commander 2000
Winternals Software LP Page 4
3 ERD Commander 2000 Setup
3.1 Requirements
ERD Commander 2000 can be configured to boot from a set of floppy disks,
from a CD-ROM (which you burn yourself), or from the system’s hard disk.
All three types of ERD Commander 2000 installations require the Microsoft
Windows NT
©
4.0/2000 installation CD-ROM (Server or Workstation). A
Windows NT/2000 system with a diskette drive and approximately 1MB of
hard disk space are also required. Additionally, you must have local
administrator access to the machine on which you are installing ERD
Commander 2000.
If you choose to create a set of boot diskettes, you will need four blank
formatted 1.44MB floppy diskettes if you are creating an installation for
Windows NT 4.0. If you are creating an installation for Windows 2000, you
will need five blank formatted 1.44MB floppy diskettes.
If you choose to create a bootable CD-ROM you will need a CD-Writer and
appropriate CD-ROM burning software. The software must support the
creation of bootable CD-ROMs that use a Custom boot record. (One choice is
Golden Hawk's CRDWIN: www.goldenhawk.com).