User Guide

ERD Commander 2000
Winternals Software LP Page 42
7 Troubleshooting
Can I run external programs or commands once I've booted with ERD
Commander 2000?
Because ERD Commander 2000 runs before the Win32 subsystem
begins executing, it is not possible to run any programs other than those
built into ERD Commander 2000.
XCOPY doesn't seem to work correctly for me.
You must specify the /H switch to copy system and hidden files, and the
/R switch if you wish to overwrite read-only files.
Why do I get a FAT32.SYS error when booting with boot disks created with
Terminal Server (TS)?
Terminal Server files take up more space than Workstation or Server
files. In order to use boot disks created in TS, you must move the
FAT32.sys file to Disk 3, then change the entry under [SourceDisksFiles]
in the txtsetup.sif file on disk one, from fat32.sys=1,,,,,,_2,4,1 to
fat32.sys=1,,,,,,_3,4,1. ERD disks created from a Workstation or Server
CD will also work on TS systems.
Why isn't my parallel port device mounted by ERD Commander 2000?
There is no parallel or serial port support for ERD Commander 2000.