User Guide

ERD Commander 2000
Winternals Software LP Page 12
3.9 File Installation
The final phase of installation is copying the ERD Commander 2000 files to
the installation point: floppy disk, CD-ROM image directory, or hard disk.
3.9.1 Floppy Disk Installation
If you are creating a floppy disk installation you will be prompted for each
floppy disk in turn. Four blank diskettes are required if you are creating an
installation for Windows NT 4.0, and five blank diskettes are required if you
are creating an installation for Windows 2000. Label the disks ERD
Commander 2000 Disk #1, #2, etc. When the diskettes have been created
you can boot a system from them by inserting diskette #1 into the floppy drive
and resetting the system. (See Figure 3-8)
Figure 3-8