User Guide

ERD Commander 2000
Winternals Software LP Page 10
3.7 OEM Drivers
If you work with systems that use SCSI adapters that Windows NT/2000 does
not natively support (i.e., hardware that requires additional drivers to be
added for Windows NT/2000 to use it) then you can add those OEM drivers
to ERD Commander 2000 .To add an OEM driver, simply enter the path the
driver (the driver file should end in. SYS) or browse to it, and press the Add
button. (See Figure 3-6)
If you are installing ERD Commander 2000 onto floppy disks then adding
additional drivers may cause ERD Commander 2000 to request you to insert
the floppy disks additional times during the boot process.
Figure 3-6