User Guide

ERD Commander 2000
Winternals Software LP Page 8
3.5 FAT32 Support
If you are creating a Windows NT 4.0 installation and installing onto floppy
diskettes, you have the option of including support for accessing FAT32
volumes. FAT32 volumes are used by Windows 95/98 and Windows 2000,
but are not normally accessible from Windows NT 4.0. (See Figure 3-4)
If you are creating a CD-ROM or hard disk installation then support for FAT32
is always enabled automatically.
When you are installing onto a set of floppy disks the additional driver
required for FAT32 support will require you to insert two of the boot diskettes
an extra time, prolonging the boot process.
Figure 3-4