User's Manual

4
4
30. Features Program Table ( 1 )
Follow the steps as below.
(1) Turn the ignition “ON” ( Engine must not be running)
(2) Press and release the override switch 6 times.
(3) Turn the ignition “OFF ” , siren chirps 6 times to confirm it has entered programming mode.
(4) During programming mode, each press on override switch is followed by 1 siren chirp .The number of
siren chirps reflect default “ ON “ and “OFF” as shown in the chart below. The shaded value is the factory
default setting.
Features Program Table ( 1)
Buttons of the remote transmitter
Pressing times on override switch
Programmed features
Press & release
Button
Press & release
Button
Press & release
Button
Press & hold
Button
1 time
Engine runtime upon ignition for 5/10/.15/20 min
5 min
10 min
15 min
20 min
2 times
Temp-controlled auto start at –5/-10/-20/-30C°
-5 C°
-10 C °
-20 C°
-30 C°
3 times
Crank time for 800ms/1000ms/1600ms/2000ms
800ms
1000ms
1600ms
2000ms
4 times
Channel #2 output time 0.8s/10s/30s/on-off
0.8s
10s
30s
On/Off
5 times
Channel #3 output time 0.8s/10s/30s/on-off
0.8s
10s
30s
On/Off
6 times
Siren/horn time for 100ms/20ms/15ms/20ms
100ms